Guitar Pedals Archives - Page 3 of 3

Q: JDM Pedals Limited Edition "Vindicator - OC Series" MK2 Tonebender & Rangemaster

Our fan-fave JDM Vindicator pedal gets a special edition using all black glass transistors. The MK2 Fuzz side is built with two Telefunken OC602 and one Valvo OC75 for an excruciatingly vindictive vintage fuzz experience. The Germanium boost (Rangemaster circuit) contains an original OC44 black glass Valvo transistor. Finished in black hammerite and marked with a single yellow enamel dot, reprezentin' the OC602 Telefunken transistors inside. So much groovy vintage tone, so many tones you can cook up, this pedal will flip your wig. As usual, made with selected transistors, Lumberg jacks, handwired, silkscreened graphics, powered by +9vDC (internal analog voltage converter), pregain cut switch for more available sounds, and made entirely in the Love of Fuzz!

Q: JDM Pedals "Elektrika" - Silicon Edition

JDM Pedals "Elektrika" Silicon Edition Features: Top Jacks Standard +9vDC operation, center negative Volume, Fuzz, and Tone controls Silkscreened graphics, Grinning Skull, & blue LED!

Q: JDM Pedals "Limited Edition Elektrika" - Vintage Black Glass OC75 version Units #61-66

JDM Pedals "Limited Edition" Elektrika This will be our fourth run of the "Limited Edition Elektrika", units #61-66 unsing Vintage OC75 Valvo "Black Glass" transistors. Only five available until we can source more OC75 transistors! Features: All vintage "black glass" manufactured by Valvo. As great sounding as they are rare. Internal analog voltage inverter, allowing power standard +9vDC, center negative ("Boss Style") power supplies for easy integration into modern pedalboards All of our Tonebender MK1 mods, as featured on the Elektrika (Gate & Tone controls, Fat/Tight Switch) "Antique Bronze" powdercoat finish, hand printed black silkscreened graphics Options - top jacks or side jacks, please specify when ordering! Our standard Elektrika has received a lot of online attention and positive reviews already, but I must say, this baby sounds simply amazing. This run will be 10 units - first come, first serve. Production time should be about 2-4 weeks. cheers, joe

Q: JDM Pedals "Swirl Muff" 4-transistor Fuzz/Distortion ("Big Muff" Style Fuzz)

JDM Pedals "Swirl Muff" Features: Custom "Psychedelic Swirl" numbered unique finish Circuit based on the "Big Muff" Distortion with unique stage switching and EQ circuits. Standard +9vDC operation, center negative Volume, Gain, Density (bass), Tone, and Mids controls Top quality jacks and switches

Q: JDM Pedals "Elektrika" - Limited Edition Mullard "Red Dot" OC42 - Units #25-50

JDM Pedals "Limited Edition" Elektrika These have been by far our most popular pedals, and the search is on to find the proper vintage germanium transistors to get "that sound". This run is built using incredibly rich sounding and at the same time low leakage & stable OC42 Mullard transistors. These are the coveted "Red Dot" Mullard transistors, which have a red dot on the metal cover over the glass tube, and a white collector dot. These are very quiet when your volume is turned down, and create a rich fuzz when cranked - a hair less gain than the Valvo Black Glass, but trading that "hairiness" for a rich, 3D clarity. Features: All vintage Mullard OC42 "Red Dot" germanium transistors. Internal analog voltage inverter, allowing power standard +9vDC, center negative ("Boss Style") power supplies for easy integration into modern pedalboards All of our Tonebender MK1 mods, as featured on the Elektrika (Gate & Tone controls, Fat/Tight Switch) Gold Hammerite finish, hand printed black silkscreened graphics joe

Q: JDM Pedals "Fuzz 292" / 3-knob Version **B STOCK small battery compartment / best with Power Supply!**

One time limited special on B-Stock! Our Kickass Silicon Fuzz Pedals - Made in classic Fuzzface style with a few modern twists to not only reduce noise and interference, but to allow you to alter the "voice" of the Fuzz; a classic "Lo" mode, a 70's style "Treble" mode (with a snarky bite great for Humbuckers), and a modern "Hi" mode with increased maximum gain for over-the-top fuzz sounds. The 3-knob Version controls are Volume/Bias/Tone - control the "Fuzz" aka. Gain with your guitar's volume knob. Vintage BC109 and BC183 transistors provide an articulate fuzz tone, and careful tuning of the circuit allows for "sparkling" cleanup as you back off on your volume pot. You can easily play entire gigs with your Red 292 on, adjusting only the guitar's volume pot for more or less drive as needed. Handmade, and tuned to create the finest Silicon Fuzz tone around.

Q: JDM Pedals "OC Boost" Custom Version

Classic Rangemaster Boost with additional controls - Limited Edition / Currently Available Transistors * According to discussion with Joe prior to ordering! Controls: "Boost" level (naturally), "EQ" control, 3-way top cut switch The "EQ" control gradually blends in more lows to the classic treble-only boost as you turn it up. Fully counterclockwise, you have a classic Rangemaster. Fully clockwise, you have the modification that Iommi famously used for Black Sabbath recordings. Instead of switching these, we implemented a blend control, so you can find the optimal setting for your rig. The top cut switch allows you to either cut just the very highest treble, which can just trim extraneous white noise above the guitar's naturaly frequencies. The "Mo'" position cuts into upper harmonics which can sound harsh with modern amps or when combining the boost with fuzz or drive pedals. Perfect!

Q: JDM Pedals "Elektrika" - Limited Edition Mullard/Philips "black glass" OC45 - Units #01-25

JDM Pedals "Limited Edition" Elektrika - OC45 This run is built using Philips/Mullard OC45 transistors, and tonally these have shown themselves perfectly suited to the Elektrika circuit. Lower noise than the OC44, with gain characteristics closer to the OC75, these fall neatly "in the middle" of those two pedals. An optimal all-around perfect fuzz for stage and recording. Features: All vintage Valvo/Mullard OC45 "Red Dot" germanium transistors. Internal analog voltage inverter, allowing power standard +9vDC, center negative ("Boss Style") power supplies for easy integration into modern pedalboards All of our Tonebender MK1 mods, as featured on the Elektrika (Gate & Tone controls, Fat/Tight Switch) Gold Sparkle finish, indelible UV printed graphics joe